Description
Why Choose UNICHEM Dry Erase Board Coating Systems?
The uniRASE® G4 coating is engineered to outperform conventional dry erase technologies.
Unlike porcelain or polyester film alternatives, uniRASE G4 delivers exceptional flexibility, remaining fracture-free on sharp bends and impact, with no delamination. That formability makes it ideal for wall panel applications that don’t require framing.
When panels are cut to size, uniRASE G4 exhibits minimal edge flaking compared with the severe edge deterioration seen in porcelain products. Additionally, where polyester laminates will blister and lose adhesion under high humidity, uniRASE G4 holds stronger, erasing cleanly with no cleaner required after seven days at 85% RH.
uniRASE G4’s long-term performance is equally impressive. After accelerated aging at 140°F, it maintains complete erasability, with no ghosting, staining, or cleaner needed. Polyester films can’t say the same.
| Dry erase surface type | Cost | Shape flexibility | Resistance | Cleanability |
|---|---|---|---|---|
| UniRASE Gen 4 | Low | Fracture-free on 90° bends | No compromise after direct or reverse impact | Complete removal of pen, crayon, permanent marker, and dry erase markers without ghosting |
| Porcelain | Moderate | Severe cracking on 90° bends | Cracking and film loss in both direct and reverse impact tests | Cannot provide complete cleanability |
| Polyester film | Low | N/A (depends on substrate and adhesive) | Delamination when subjected to impacts | Cannot provide complete cleanability |
FAQs
How can you remove Sharpie from a dry erase board coated with uniRASE Gen4A?
To remove Sharpie marks from a uniRASE-coated dry erase board, write over the Sharpie marks with a dry erase marker, then immediately wipe them away with a dry paper towel. This method may require multiple tries, but it will result in complete removal.